אקריליק חלודה מהירה מבוססת אקריליק צבע מסיר עבור ציפוי מברשת יישום עבור צבע רכב

Usage

Be used as primer before using topcoat;
or separately as rust conversion and anti-corrosion paint.

Product Color

Slightly reddish in opaque state.

Main Components

Water-based acrylic acid emulsion, corrosion
inhibitors, water, and rust conversion agents.

PH

Weakly acidic

Formaldehyde Content

0

Benzene Content

0

Compatibility

Good compatibility, can be adapted to various topcoats.

Function

Convert rust,anti-rust protection

Theoretical Coverage Rate

10-12m2/kg
(Actual paint consumption may vary depending on the application method, surface roughness, and environmental conditions.)

Storage Conditions

1.Keep the container tightly sealed.
2.Store in ventilated,dry and cool place at 5-35°C
3.Away from direct sunlight
4.Separately from strong acids, alkalis, oxidizing agents, food, and animal feed.

Substrate Preparation

1.For surfaces with severe rust and loose rust, remove the loose rust before applying the paint.Use water jet, steel brush,
electric brush, or other tools to remove
loosely adhered rust and foreign substances from the metal surface.
2.Oil-contaminated areas should be cleaned with degreaser.
3.For smooth and firmly adhered old paint surfaces, roughen the surface before painting.

Dilution Method

Before use, thoroughly stir the original paint from top to bottom. If the viscosity is too high, add a suitable amount of water.
The amount of water added should not exceed 10%. Add water while stirring to ensure uniformity of the paint. Do not over-dilute,
as it may result in sagging, loss of gloss, poor drying, and insufficient coverage of the paint film.

Application Conditions

1.Do not apply in humid or cold weather conditions (temperature below 5°C or relative humidity above 85%), as it may not achieve
the desired coating effect.
2.Use in well-ventilated areas. If working in enclosed spaces, install ventilation devices and use appropriate protective
equipment.
3.Do not apply in rainy or snowy weather.

Application Method

1.Can be applied by brush, roller, or spray. Apply multiple thin coats, avoiding applying a thick coat at once to prevent cracking
of the paint film. If conditions permit, airless spraying or brush application is recommended for better rust conversion effect.
2.Depending on the degree of rust, apply 2-3 coats with an interval of at least 30 minutes between applications. Apply
intermediate coats and topcoats after 24 hours.

Recoating Time

For high requirements and as an anti-corrosion coating, after applying one coat, wait for 30-60 minutes before applying another
coat to achieve a uniform, dense, and glossy film for stronger corrosion resistance.

Curing Time

≥7 days. In low-temperature environments (not below 5°C), the curing time should be appropriately extended to achieve the best
paint film effect.

Tool Cleaning

During and after painting, clean all application tools promptly with water. If the paint is unused, not overly diluted, and
uncontaminated, it can be poured back into the original sealed container for storage. If there are dry skins affecting use, filter
the paint through a 100-mesh sieve before use.